LED Street Light Application

led light housing

Where is LED StreetLight Application ?

LED street light main application, main road, secondary trunk road, branch road, factory, school, garden, city square, courtyard and other road lighting;

Advantages of led street lamps ?

1.Its own characteristics-the unidirectional nature of light, no diffuse light, to ensure the efficiency of light.

2.The LED street lamp has a unique secondary optical design, which irradiates the light of the LED street lamp to the required lighting area, further improves the illumination efficiency to achieve the purpose of energy saving.

3.The LED has reached 110-130 lm/W, and there is still a lot of room for development, and the luminous efficiency of high-pressure sodium lamp increases with the increase of power. Therefore, the overall light efficiency of LED lamp is stronger than that of high-pressure sodium lamp .(this overall light efficiency is theoretical. In fact, the light efficiency of high-pressure sodium lamp above 250 W is higher than that of LED lamp).

4.The light color rendering of LED street lamp is much higher than that of high pressure sodium lamp, the color rendering index of high pressure sodium lamp is only about 23, but the color rendering index of LED street lamp is more than 75, which can be reduced by more than 20% more than 20% lower than that of high pressure sodium lamp.

5.LED street lamp has automatic control and energy saving device, which can realize the maximum possible power reduction and energy saving under the condition of meeting the lighting requirements of different periods of time. It can realize computer dimming, time control, light control, temperature control, automatic inspection and other humanized functions;

6.Long life: can use more than 50,000 hours, provide three years of quality assurance, the deficiency is that the life of the power supply is not guaranteed;

7.Light efficiency: using more than 100 LM ≥ chip, compared with the traditional high-pressure sodium lamp energy-saving 75% above;

8.Easy to install: no buried cable, no rectifier, etc., directly connected to the lamp pole or nested with the original lamp shell;

9.Excellent heat dissipation control: summer temperature control below 45 degrees, and passive heat dissipation, summer heat dissipation protection is insufficient.

10.Reliable quality: circuit power all use high-quality components, each LED has a separate overcurrent protection, no need to worry about damage;

11.Uniform light color: no lens, not to improve brightness and sacrifice uniform light color, so as to ensure no aperture uniform light color;



[email protected]

Shenzhen EKI Lighting Industrial Co.,Limited was established to create an innovative concept for environmentally friendly lighting requirements. Drawing on vast experience of LED Technology since 2006 .

Start From OEM Designing Aluminum Die-Casting Light housing Factory, For over 11 years Fighting , Our team at Lighting have been designing, developing and manufacturing a new generation of LED lighting solutions for numerous applications, indoors LED STREET LIGHTING, TUNNEL LIGHTING, HIGH BAY INDUSTRIAL LIGHTING, FLOOD LIGHTING, DIE CASTING ALUMINUM HOUSING